私たちの 製品
廃物の焼却炉の大量の空気送風機の吸出し送風機
Garbage Incinerator High Volume Induced Draft Air Blower Fan Introduction The 6-06 series dust exhaust centrifugal fan has the characteristics of low dust accumulation and wear resistant. Garbage Incinerator High Volume Induced Draft Air Blower Fan is suitable for discharging gas containing dust, wood chips and finely divided fibers (If it contains hard particles, a dust removal device must be installed in front of the fan.), it can also be used as a general ventilator for
発電所の熱放散の吸出し通風IDファンを進めて下さい
Forward Efficient Energy-Saving Heat Dissipation Induced Draft Fan Introduction Forward Efficient Energy-Saving Heat Dissipation Induced Draft Fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. Forward Efficient Energy-Saving Heat Dissipation Induced Draft Fan is also suitable for conveying air and non-corrosive, non-self-igniting, non
自由に立つStokerfeedのボイラーIDのファンによって引き起こされる後方の遠心ファン
Stokerfeed Boiler Forced Draft Antifraying Backward Induced Blower Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifugal fan is an
頑丈な吸出し送風機のボイラーIDによって強制される換気の炭素鋼
Industrial Boiler ID Forced Ventilating Carbon Steel Heavy Duty Blower Fan Introduction This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type transmission. This
煙の排気後方に曲げられた遠心ファンの吸出し通風の送風機
Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan Introduction The Long Lifetime Smoke Exhaust Backward Curved Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Long Lifetime Smoke Exhaust Backward Curved
摩耗の抵抗力がある吸出し送風機のVベルトによって運転される遠心ファン
Forced Draft Of Industrial Kilns Abrasion Resistant V-Belt Driven Induced Fan Introduction The 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Forced Draft Of Industrial Kilns Abrasion Resistant V-Belt Driven Induced Fan can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow
ボイラー有害な空気排気の送風機の産業吸出し送風機
Harmful Air Emissions Industrial Boiler Exhaust Induced Draft Centrifugal Fan Introduction Harmful Air Emissions Industrial Boiler Exhaust Induced Draft Centrifugal Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more than 150mg/m3. The fan can also be used in cement kiln decomposition process, steel smelting
排気の送風機の吸出し送風機の強制された換気空気ろ過システム
Forced Ventilating Air Filtration System Induced Draught Exhaust Blower Fan Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. In the coal-fired boiler system, the ventilation and induce draft systems of various boilers with evaporation capacity of 20 tons/hour to 800 tons/hour can be configured.
有効な省エネの遠心分離機の吸出し通風の送風機の熱放散
Heat Dissipation Efficient Energy-Saving Induced Draft Centrifugal Blower Fan Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Centrifugal fan is applied in
中型圧力吸出し送風機のボイラーIDファンの単一の幅の単一の入口
Industrial Boiler Forced Induced Draft Building Ventilation Blower Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced draft fans with the low
エネルギー効率の吸出し送風機の単一の入口炉の冷却
Energy Efficiency Single Inlet Kilns Cooling Induced Draft Fan Introduction The 7-07 series high-pressure centrifugal fan has a high output pressure, can transport normal temperature or high temperature various gases and various forms of materials, and also can be used in harsh working environments. Such as conveying high temperature/harmful/dangerous gas, hard particles, powder, debris, fiber, forced ventilation, industrial dust collectors, air filtration systems, flue gas
産業ボイラー吸出し送風機高圧SIMOの送風機の長い生命
Industrial Boiler Induced Draft Antiwear Long Life Blower Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials.
SWSI遠心ファンの吸出し送風機の高温冷却
Coupling Driving High Temperature Cooling Induced Draft Blower Fan Introduction The Coupling Driving High Temperature Cooling Induced Draft Blower Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. Coupling Driving High Temperature Cooling Induced
反摩耗の単一の吸引の吸出し通風の送風機の大量のファン送風器
High Volume Antiwear Single Suction Induced Draft Blower Fan Introduction The High Volume Antiwear Single Suction Induced Draft Blower Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than 80°C, and the dust and hard fine particles contained in the medium are not more
三相ステンレス鋼の吸出し送風機の後方の遠心ファン
Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan Introduction The Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. Stainless Steel Backward Energy Efficiency Induced Draft Blower Fan is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The temperature of the medium is generally not more than
反研摩の高い気流の発電所ファンの産業遠心送風機
Anti Abrasive High Air Flow V-Belt Driving Power Plant Industrial Blower Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The 5-12 series centrifugal fan
大きいSIMOの送風機の火力発電所の石炭によって発射されるボイラー ファン
Large Capacity Coal-Fired Boiler Thermal Power Plant Air Blower Fan Introduction Large Capacity Coal-Fired Boiler Thermal Power Plant Air Blower Fan is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind
産業炉の発電所ファンの強制草案の遠心分離機の送風機
Forced Draught Of Industrial Kilns Power Plant Centrifugal Blower Fan Introduction The Forced Draught Of Industrial Kilns Power Plant Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel
