私たちの 製品
ACモーター カップリングによって運転される高温後方の曲げられた集じん器ファン
AC Motor Coupling Driven High Temperature Backward Curved Dust Collector Fan Detail introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances
16Mn倍の入口の後方の生物量のボイラー集じん器の送風機ファン
16Mn Double Inlet Backward Biomass Boiler Dust Collector Blower Fan Detail introduction The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. Product
Q345単一の吸引鉱山の換気の集じん器遠心ファン
Q345 Single Suction Mine Ventilation Dust Collector Centrifugal Fan Detail introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are
Q235単一の吸引の大容量の後方のクーリング吸出し送風機
Q235 Single Suction Large Capacity Backward Cooling Induced Draft Fan Introduction Of Centrifugal Fan G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can
HG785は鋼鉄産業中型圧力集じん器遠心ファンを合金にした
HG785 Alloyed Steel Industrial Medium Pressure Dust Collector Centrifugal Fan Detail introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Product features 1. The
2314~4295 paの二重吸引遠心ファンの省エネの排気
Double Suction Energy Saving Exhaust Material Handling Blower Introduction It is a high-efficiency energy-saving product jointly designed by the national fan industry and organized by the national wind power industry and the Ministry of Machinery Industry. It has the characteristics of high efficiency, low noise, flat performance curve and wide efficient area. Industrial boilers of 5 ~ 35 tons/hour can be used, those with similar intake conditions and suitable performance can
頑丈な合金鋼中型圧力エア・サプライの吸出し送風機
Heavy Duty Alloy Steel Medium Pressure Air Supply Induced Draft Fan Introduction Of Centrifugal Fan The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan
炭素鋼の長い寿命のAntifrayingの煙の排気の吸出し送風機
Carbon Steel Long Lifetime Antifraying Smoke Exhaust Induced Draft Fan Introduction Of Centrifugal Fan The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan
炭素鋼の前方耐圧防爆吸出し送風機を運転するVベルト
V-Belt Driving Carbon Steel Forward Explosionproof Induced Draft Fan Introduction Of Centrifugal Fan G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can
二重吸引の高圧後方の冶金学のステンレス鋼の送風機ファン
Double Suction High Pressure Backward Metallurgy Stainless Steel Blower Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. Technical data series model Rotation Speed (r/min) Total Pressure (Pa) Air Capacity (m³/h) Power (kW) 9-08 7.1D 2900 10635～12427 12292
ACモーター長い寿命のAnti-Explosion炉のステンレス鋼の送風機ファン
AC Motor Long Lifetime Anti-Explosion Furnace Stainless Steel Blower Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in
炭素鋼の単一の入口の防蝕鋳物場のステンレス鋼の送風機
AC Motor Long Lifetime Anti-Explosion Furnace Stainless Steel Blower Fan Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in
エネルギー効率の生物量のボイラー ガス送管 ファンを運転するアルミ合金Vベルト
Aluminium Alloyed V-Belt Driving Energy Efficiency Biomass Boiler Flue Gas Fan Introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. The most commonly used for forced ventilation, rapid drying, rapid cooling and heat dissipation, cement production line chiller cooling, clinker cooler,
単一の吸引16Mnの後方の曲げられた石灰がまのガス送管の送風機ファン
Single Suction 16Mn Backward Curved Lime Kiln Flue Gas Blower Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short fiber materials.
炭素鋼の産業前方排気の遠心流れファン
Carbon Steel Industrial Forward Exhaust Centrifugal Flow Fan Introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Technical data series model Rotation
合金鋼の高い気流の高い耐久性の乾燥の遠心流れファン
Alloy Steel High Air Flow High Wear Resistance Drying Centrifugal Flow Fan Introduction At present, there are many series of boilers, and the situation of burning coal quality is quite different, after installing dust removal equipment and waste heat utilization equipment, insufficient pumping force affects normal operation. In order to overcome the insufficient pumping force due to the above reasons, the furnace has a positive pressure, which affects the combustion and
HG785は後方鉱山が遠心流れファンを換気する鋼鉄中型圧力を合金にした
HG785 Alloyed Steel Medium Pressure Backward Mine Ventilate Centrifugal Flow Fan Introduction 6-04 series fans have high pressure coefficient, low peripheral speed, low noise, flat performance curve and wide area of high efficiency. They are used in forging furnaces and high pressure forced ventilation and are widely used to transport materials and air. The maximum temperature should not exceed 250 degrees Celsius. Suitable for flow and dust removal ventilation systems in
高圧カップリングによって運転されるエア・サプライの遠心流れファンの合金鋼
High Pressure Alloy Steel Coupling Driven Air Supply Centrifugal Flow Fan Introduction 1. It can output very high pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered. 2. In the case of using the common base , the installation is very simple and basically does not require the support of professional technicians. 3. The bearing box is reserved with the temperature and vibration
