私たちの 製品
連結石炭の製造所のステンレス鋼の送風機の有効な省エネを運転する
Efficient Energy-Saving Coupling Driving Coal Mill Stainless Steel Blower Introduction Of Centrifugal Fan The 5-12 series centrifugal fan is an enhanced version of the 5-11 series medium pressure centrifugal fan. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. The performance of the fan is expressed by parameters
有害な空気放出ステンレス鋼の送風機の大量のさび止め
Hot Sale High Volume Anticorrosion Harmful Air Emissions Stainless Steel Blower Introduction Of Centrifugal Fan The 5-06 series fan can be used in the feeding system of 2-670t/h steam boiler in thermal power plants, it can also meet the requirements of the high-pressure head performance parameters of the fluidized bed furnace. This series of fans can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft
ステンレス鋼の物品取扱いの送風機の高温爆発の補強
Stainless Steel High Temperature Explosion Proofing Material Handling Blower Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data
後方の物品取扱いの送風機ファンの中型圧力Antifraying
Medium Pressure Backward Antifraying Material Handling Blower Fan Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The impeller is subjected to a high standard of dynamic balancing adjusting to ensure stable operation of the fan. Test assembly after production is completed to ensure that there is no
HG785は鋼鉄セメント遠心ファンの二重吸引の換気を合金にした
HG785 Alloyed Steel Double Suction Ventilation Cement Centrifugal Fan Introduction 1. It can output high out gas pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered. 2. Compact shape, saving space. 3. In the use of common base, the installation is very simple and requires little support from a professional technician. 4. Made of high quality carbon steel, Stainless steel or
耐久力のあるVベルトによって運転されるQ345後方の曲げられたセメントの送風機ファン
V-Belt Driven Q345 Backward Curved Wear Resistant Cement Blower Fan Introduction The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. It can be selected if the intake conditions are equivalent and the performance is suitable. It can be used to transport normal temperature
炭素鋼のセメントのAntiwear遠心送風機ファンの中型圧力
Carbon Steel Medium Pressure Antiwear Cement Centrifugal Blower Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. The fan is equipped with temperature and vibration sensors, which can easily install the fan operation monitoring device. Made of high quality carbon steel,
ステンレス鋼は集じん器遠心ファンの高圧を換気する
High Pressure Stainless Steel Ventilate Dust Collector Centrifugal Fan Detail introduction The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. This series of fans is a new type of high efficiency industrial fan in the field of small flow and medium pressure. For dust-containing gas, we can meet
生物量のボイラー集じん器ファンの先に運転する単一の吸引のカップリング
Single Suction Coupling Driving Forward Biomass Boiler Dust Collector Fan Detail introduction This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly designed by the national fan industry and organized by the national wind power industry and the
耐圧防爆合金鋼の集じん器の遠心ファンの長い寿命
Alloy Steel Long Lifetime Explosionproof Dust Collector Centrifugal Fan Detail introduction The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. The fan can output higher gas pressure, and can provide more gas flow at the same time, low noise. In the case of using the common base, the installation is very simple and basically does not require the support of professional technicians. The motor shaft is elastically connected with the
集じん器ファンの高い気流のエネルギー効率を冷却する炉
High Air Flow Energy Efficiency Kilns Cooling Dust Collector Fan Detail introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering
ACモーター産業ボイラー一次空気のガス送管 ファンの高温
AC Motor High Temperature Industrial Boiler Primary Air Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
焼結機械のための後方の曲げられたガス送管 ファンの頑丈な産業
Heavy Duty Industrial Backward Curved Sintering Machine Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.
耐圧防爆産業エネルギー効率石灰ロータリー キルンのガス送管 ファン
Industrial Energy Efficiency Anti-Explosion Lime Rotary Kiln Flue Gas Fan Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. Medium temperature: The medium temperature of standard fans is not more than 80 °C, the V-belt driving type fan can transport media
長い生命エネルギー効率の集じん器の送風機の単一の入口
Long Life Energy Efficiency Single Inlet Dust Collector Fan Detail introduction The 8-17 series high-pressure small-flow fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Customized design according to
ACモーターAntifrayingの排気のセメントのファン送風器4486 | 8971m3/h
AC Motor AC Motor Antifraying Exhaust Cement Blower Fan Introduction The 7-08. series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Technical data series
Q235単一の入口の長い寿命の乾燥の物品取扱いの送風機
Q235 Single Inlet Long Lifetime Drying Material Handling Blower Introduction G4-10 and Y4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. It can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low noise and high efficiency. They can transport clean gas, dusty
10635~12427Pa高圧遠心送風機前方材料の乾燥
High Pressure Forward Materials Drying Stainless Steel Blower Introduction Of Centrifugal Fan The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in the medium
