私たちの 製品
ステンレス鋼の生物量の換気のAnti-Explosionボイラー遠心ファン
High Temperature Stainless Steel Biomass Boiler Centrifugal Fan Introduction This series of id fan in boiler can also be used for dust removal, mine ventilation and general ventilation systems. The blower delivers air, and the induced draft fan delivers flue gas or gas containing foreign particles. It is capable of outputting a higher outlet pressure while providing more gas flow with lower noise. Stable operation at higher media temperatures.The performance of the fan is
建物の換気の集じん器ファンのVベルトによって運転される遠心ファン
Long Life Building Ventilation V-Belt Driving Dust Collector Fan Introduction The Long Life Building Ventilation V-Belt Driving Dust Collector Fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3.
焼結の熱放散HG785の鋼鉄2043pa発電所ファン
Sintering HG785 Alloyed Steel Heat Dissipation Power Plant Blower Fan Introduction Of Centrifugal Fan Centrifugal fans generally use single-side air intake and use single-stage impellers; those with large flow can be air-intaken on both sides and use two back-to-back impellers, which are also called double-suction centrifugal fans. The principle of gas discharge: When the gas between the blades of the centrifugal fan rotates, the kinetic energy obtained by the centrifugal
中型圧力耐圧防爆遠心流れファンを運転するVベルト
V-Belt Driving Medium Pressure Explosionproof Centrifugal Flow Fan Introduction Mainly to meet the dust emission requirements of the electric arc furnace exhaust gas purification equipment, improve the workshop environment, to ensure that the dust concentration in the electric furnace working area meets the “sanitary standards for industrial enterprises”, and can also be used in various occasions with the same functional requirements. The impeller is annealed to completely
低雑音の遠心ファンの頑丈な産業送風機1年の保証
Industrial Building Ventilate Single Suction Dust Collector Blower Fan Introduction 1. When the pressure requirement is met, a large gas flow can be output, and the noise is very low. 2. The fan speed can be flexibly set by matching different diameters of belt pulley to make the fan run at the highest efficiency point and reduce energy waste. 3. Motor sliding guides are provided for easy tensioning of the belt to reduce energy loss due to belt slack. 4. When the airflow
石炭の注入の反爆発のVベルト1820r/minの遠心換気扇
Coal Injection Anti-Explosion V-Belt Driven Centrifugal Ventilation Fan Blower Introduction It is boiler induced draft fan with a total internal pressure efficiency of 90.5% specially designed to be suitable for various coal quality and equipped with a smoke-and-dust removal device (1~20 tons/hour). This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to
平らな性能曲線が付いている高力鋼鉄吸出し送風機
Q345 High Strength Steel Induced Draft Industrial Blower Fan Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. Q345 High Strength Steel Induced Draft Industrial Blower Fan can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. The fans are commonly used in
耐圧防爆高温ガス送管ファンの高圧遠心送風機
High Temperature High Pressure Flue Gas Centrifugal Blower Fan Introduction The High Temperature High Pressure Flue Gas Centrifugal Blower Fan is designed for applications requiring high pressure. Under the premise of ensuring a certain amount of air, the full pressure can reach the high pressure requirement. The High Temperature High Pressure Flue Gas Centrifugal Blower Fan is mainly used for blasting furnace blast and other forced air supply, and can also be used for
AC遠心ファンを検査するVベルトによって運転される押し込み換気の爆発
V-Belt Driven Explosion Proofing Forced Ventilating High Pressure Centrifugal Fan Introduction 9-03 series fan-type iron furnace special high-pressure centrifugal fan, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. The fan can also be used as the blast for various furnace forging furnaces. It is also suitable for conveying air and non-corrosive, non-self-igniting, non-viscous materials or light powder/debris/short
単一の吸引の高い気流の後方の産業排気の送風機
Single Suction High Air Flow Backward Biomass Boiler Blower Fan Introduction The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances are allowed in the
産業使用青および白のための鋳物場の炉の集じん器の送風機ファンの空気送風機
Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan Introduction The Q345 Coupling Driving Foundry Furnace Antiwear Dust Collector Fan has a large flow rate and moderate pressure. This fan is designed for the purpose of using industrial boiler to work in the high-efficiency area and achieve the energy-saving target. The fan is suitable for equipped with economizer (heater) and smoke and dust removal device. It is a high-efficiency energy-saving product jointly
頑丈な遠心ファンの熱放散の産業塵の送風機
Industrial Equipments Heat Dissipation Dust Collector Centrifugal Blower Fan Introduction 1. The Industrial Equipments Heat Dissipation Dust Collector Centrifugal Blower Fan can output high outgas pressure and can work at higher medium temperature, suitable for any industrial occasion where high pressure & high temperature gas needs to be delivered. 2. In the case of common base, the installation is very simple and requires little support from a professional technician. 3.
火力発電所の空気排気の送風機の吸出し送風機
Power Plant Induced Draught Air Supply Antiwear Exhaust Blower Fan Introduction The 4-10 series ventilation and induced draft fans are suitable for the ventilation and induced draft fan systems of 2~670T/h steam boilers in thermal power plants. Power Plant Induced Draught Air Supply Antiwear Exhaust Blower Fan can also be used for mine ventilation and general ventilation without other special requirements; Mainly used to meet the needs of large air flow applications, low
低圧を運転するVベルトは後方に物品取扱いの送風機を曲げた
V-Belt Driving Low Pressure Backward Curved Material Handling Blower Introduction The 5-10 series ventilator is a high efficiency and energy saving product developed by our company, which is used for ventilation and exhaust system of smelting, chemical, medicine and dust removal production lines. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the highest efficiency point and reduce energy waste. Motor slide guide can be
二重入口の換気3187paの吸出し送風機のボイラー
Double Inlet Efficient Energy-Saving Ventilation Induced Draft Fan Introduction: The 4-09 series large-flow centrifugal fan is the earliest used fan in China, and it is also the most commonly used fan. Suitable for conveying clean air or light materials at normal temperature, most commonly used in industrial furnaces for air supply, light particle/powder/crush/fiber transportation, air drying/cooling of materials, ventilation and smoke exhaust, and other areas. No viscous
高温産業ボイラーFDガス送管の遠心送風機ファン
High Temperature Industrial Boiler FD Flue Gas Centrifugal Blower Fan Introduction The High Temperature Industrial Boiler FD Flue Gas Centrifugal Blower Fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the High Temperature Industrial Boiler FD Flue Gas Centrifugal Blower Fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful
灰色の青い物品取扱いの送風機のステンレス鋼の遠心分離機ファン
Stainless Steel Efficient Energy-Saving Material Handling Centrifugal Fan Introduction The Stainless Steel Efficient Energy-Saving Material Handling Centrifugal Fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. Stainless Steel Efficient Energy-Saving Material Handling Centrifugal Fan belongs to small flow and medium pressure series. Stainless Steel Efficient Energy-Saving Material Handling
単一の入口アルミ合金前方4909-9817 M3/Hの集じん器の送風機ファンの
Single Inlet Aluminium Alloyed Forward Dust Collector Blower Fan Detail introduction The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Product
