"power plant blower"

耐久性のある炭素鋼構造、耐摩耗性コンポーネント、および柔軟な電圧オプション (380V ～ 10KV) を備えた高圧遠心ファン。安定した性能で産業用換気、集塵、マテリアルハンドリングに最適です。

Single Inlet High Temperature Blast Furnace High Pressure Centrifugal Fan Introduction Of Centrifugal Fan The 9-10 series high-pressure centrifugal fan is the latest developed high-efficiency and energy-saving product, whose performance fully meets the aerodynamic performance of general fan 9-08 series, and has the characteristics of high efficiency, low noise, flat performance curve, large flow regulation range and wide efficient area. It is suitable for conveying air and

Double Suction Industrial High Temperature Medium Pressure Boiler Fan Introduction Of Centrifugal Fan This type of fan is currently used in the boiler industry. The air volume of the induced draft fan and the difference in wind pressure are relatively large, in order to adapt to the above situation, considering the practicability of the fan, in addition to the 20-ton boiler ID fan need large power coupling direct transmission, the other uses the triangular belt type

High Air Flow Energy Efficiency Kilns Cooling Dust Collector Fan Detail introduction The 9-10 series centrifugal fan can output high gas pressure, suitable for conveying normal or high temperature clean gas/combustible gas/corrosive gas/mixed with a few impurities, light particles/debris/short fiber materials. Before the induced draft fan, dust removal device with a dust removal efficiency of no less than 85% must be installed to reduce the dust content of the smoke entering

AC Motor High Temperature Industrial Boiler Primary Air Flue Gas Fan Introduction Of Centrifugal Fan The 9-10 series high pressure fan is generally used for forging furnace and high pressure forced ventilation and widely used for material transportation. It is suitable for conveying air and non-corrosive, unnatural and non-viscous gases. The fan is made of high quality carbon steel, and can also use stainless steel or other metal materials according to customer requirements.

Large Capacity Aluminium Alloyed Drying Industrial Centrifugal Fans Introduction Of Centrifugal Fan Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. This series of fans is a new type of high efficiency industrial fan in the field of small flow and medium pressure. Technical data series

Alloy Steel Backward Steam Boiler High Temperature Centrifugal Fan Introduction Of Centrifugal Fan 9-03 series fan-type iron furnace special high temperature centrifugal blower, is suitable for IL/h, 2L/h, 3L/h, 3L/h, 7L/h melting rate of iron furnace blast performance requirements. It is mainly used for blasting furnace blast and other forced air supply, and can also be used for tunnels to exhaust or supply air through hard pipes. Technical data series model Rotation Speed

Materials Drying Main Shaft Alternating Current Centrifugal Ventilation Fans Detail introduction : The 4-14 series centrifugal fan is suitable for indoor ventilation in general factories and large buildings. It can be used to input gas as well as to output gas. The gas delivered by the 4-14 series fan should be no more than 80 °C air and other gases that are not self-igniting and are not harmful to the human body and are not corrosive to steel materials. No viscous substances

Single Suction Energy Saving Backward Curved Cooling Industrial Centrifugal Fans Introduction Of Centrifugal Fan The 6-05 medium-pressure series fan can meet the performance requirements of large flow and high pressure at the same time, and has the characteristics of high efficiency and low noise. It is a series centrifugal fan products with a wide range of performance. The designed max full pressure efficiency is higher than 80% new series boiler ventilation fans and induced