"impeller centrifugal fan"

Alloy Steel Single Inlet Long Lifetime Centrifugal Ventilation Fans Air Supply Introduction The 4-10 series centrifugal Fan can be used for indoor ventilation in general factories and large buildings. No viscous substances are allowed in the gas, and the dust and hard particles contained in the gas are not more than 150 mg/m3. The gas temperature does not exceed 80°C, and similar gas properties are also available. Detail introduction Mainly to meet the dust emission

後方に湾曲した羽根車を備えた高性能遠心送風機で、15 ～ 20% の省エネを実現します。クリーン/ダストエア、さまざまなドライブオプションに合わせてカスタマイズ可能、ISO/CE 認定済み。頑丈な構造により、信頼性の高い産業用換気が保証されます。

Energy Efficiency Anti Abrasive Foundry Furnace Induced Draft Centrifugal Fan Introduction 6-06 series centrifugal fan is generally used for gas transportation of granular or powdery materials, and can be widely used to transport air and non-corrosive non-self-igniting, non-viscous substances. The temperature of the medium generally does not exceed 50°C (max 80°C), the dust and hard particles contained in the medium is not more than 150 mg / m3. Technical data series model

Q345 Anticorrosion Kilns Cooling Large Capacity Centrifugal Flow Fan Introduction 1. It can work stably at a high medium temperature, and can output a large gas flow with low noise when the pressure requirement is met. 2. The fan blade placement angle is optimized, more wear-resistant and longer service life. 3. The air damper can be used to flexibly adjust the pressure and flow of the fan during operation. It is also possible to select a variable frequency motor, with adjust

Metallurgy Induced Draught Calcining Kilns Snail Fan Blower Introduction: The 7-08 series medium pressure centrifugal fan is the latest series of high-efficiency industrial centrifugal fan developed by our company. It has the highest efficiency of 85.4%. It belongs to small flow and medium pressure series. It has stable and high performance and is widely used in environmental dust removal, material transportation and equipment matching in industrial fields. Metallurgy Induced

Electric Actuator Rolling Bearing Mineral Powder Sintering Air Ventilation Fan Detail introduction The 9-08 series high pressure fan is generally used for forging furnace and high pressure forced ventilation, and can be widely used to transport materials, transport air and non-corrosive, non-self-igniting, non-viscous substances gas. The temperature of the medium generally does not exceed 50 ° C (maximum not more than 80 ° C). The dust and hard particles contained in the

Alloy Steel Large Capacity AC Motor Building Ventilation Centrifugal Ventilation Fans Introduction The 6-11 series have the characteristics of high efficiency, flat performance curve, wear resistance, and work stability. It has excellent performance and can output high pressure. It can be used to transport normal temperature or high temperature non-flammable gases, particles, powder, debris, fibrous materials etc. The fans are commonly used in large-scale industrial systems

Carbon Steel Medium Pressure Antiwear Cement Centrifugal Blower Fan Introduction Medium requirements for 6-08 series fans: The medium to be transported should be non-corrosive, non-flammable, explosive, and free of viscous substances. The dust and hard particles contained in the medium should be no more than 150mg/m3. The fan is equipped with temperature and vibration sensors, which can easily install the fan operation monitoring device. Made of high quality carbon steel,

Carbon Steel High Volume Anti-Explosion Foundry Induced Draft Fan Introduction Of Centrifugal Fan This series of induced draft is a new type of high efficiency industrial fan in the field of small flow and medium pressure. According to customer performance requirements customized design, and optimized by CFD technology, the energy consumption is lower than similar models. The fan speed can be flexibly set by matching different belt pulley diameters to make the fan run at the